【软管泵路面抛丸机客户好评】

电机+定整比减速器 <br />
  主要特点：承载能力强，效率高，振动小，噪音低，能耗低，传动方式简单，但由于其速比恒定，所以决定了流量不可调。<br />
   变频电机+变频器
  主要特点：扭矩大，调速精度高，运转平稳，性能稳定，可实现转速的自动调节，确保了流量的任意控制，弥补了无级变速器自动化程度不高的缺陷。缺点是变频器的价格较高。<br />
    液压马达式。                 

软管泵可应用于多用移动泵站的结构 :自吸高度可达到9米，水平自吸可达200米以上，无需灌泵。特别适合于市政下水道系统的污水、污泥抽排。无堵塞、杂质通过能力强。普通的塑料袋、沙石、编织袋、泥浆、毛发等杂物都不会影响泵的使用。采用原轮泵，耐干运行，泵体坚固耐用、寿命长。使用快速连接接头，方便进出口管道的装配。 整车设计紧凑、适应于狭小空间使用。使用便捷拆卸式防雨布、或硬质钢板隔音罩，低噪音设计，符合环保标准要求。

The hose pump can be applied to the structure of a multi-purpose mobile pumping station: self-priming height can reach 9 meters, horizontal self-priming can reach more than 200 meters, no need for drainage irrigation pump. Particularly suitable for sewage and sludge drainage in municipal sewer systems. No blocking, strong ability to pass impurities. General plastic bags, sand, woven bags, mud, hair and other sundries will not affect the use of the pump. The original wheel pump is resistant to dry running, and the pump body is durable and durable. Use quick connect joints to facilitate the assembly of inlet and outlet pipes. The complete vehicle design is compact and suitable for use in small spaces. Easy-to-remove rainproof cloth or hard steel sound insulation cover, low noise design, meet environmental protection standards.

 

软管泵工作原理：
一根内壁光滑，强度可靠的特制橡胶软管安装在泵体内部，通过一对压辊沿着软管旋转挤压，这样的 旋转使得介质往一个方向输送而不会倒流，软管在输送介质之后，由被压扁软管的自身弹性和侧导轮的强制下，软管恢复原状，此时，软管内产生高真空将介质再次吸入管腔，然后介质在随之而来的压辊挤压下从软管内排出，如此周而复始，介质不断的被吸入和排出。目前产品使用温度为≤100℃。根据用户需要可以开发使用温度在120℃的软管泵软管产品。
Working principle of hose pump:
A special rubber hose with a smooth inner wall and reliable strength is installed inside the pump body. It is rotated and squeezed along the hose by a pair of pressure rollers. This rotation allows the medium to be transported in one direction without flowing back. After that, due to the elasticity of the flattened hose and the force of the side guide wheels, the hose returns to its original state. At this time, a high vacuum is generated in the hose to suck the medium into the lumen again, and then the medium is pressed by the subsequent pressure roller. It is discharged from the hose under the squeeze, and so on and on, the medium is continuously sucked in and discharged. The current product temperature is ≤100 ℃. According to user needs, we can develop hose pump hose products with a temperature of 120 ℃.